The Raptor Towing Solution.
The Ranger Raptor airbag kit from Polyair is the solution Raptor owners have been looking for. The Ford Ranger Raptor is one of the most capable utes on the market — factory-tuned long-travel suspension, serious off-road performance, and a ride quality that most dual-cabs simply cannot match. But that same suspension setup that makes it so good off-road comes with a real-world trade-off.
Put a trailer on the back, load up the tray, or add a set of roof racks and some gear — and those rear springs start to sag. For a ute built to do more, that is a frustrating limitation. The Polyair Bellows Ultimate Kit is how you fix it without compromising what makes the Raptor great.
Why the Raptor Needs an Airbag Kit
The Raptor's suspension is tuned for compliance and articulation — exactly what you want when you are navigating rough terrain. The long-travel setup absorbs bumps, keeps the tyres planted, and delivers that smooth, controlled ride the Raptor is known for. It is genuinely impressive engineering for an off-road focused ute.
The trade-off is that this softer setup was never designed to handle significant added weight without sagging. And rear-end sag is not just a cosmetic issue — it affects weight distribution, headlight aim, braking balance, and overall stability when towing or carrying a load. If you regularly tow a caravan, a boat, or a work trailer, you will feel it every time.
This is exactly the gap a Ranger Raptor airbag kit is designed to fill — adding adjustable rear support without touching the factory suspension setup.
Rear-end sag is not just a cosmetic issue — it affects headlight aim, braking balance, and stability.
The Ranger Raptor Airbag Kit Built for Both Worlds.
The Polyair Bellows Ultimate Kit is the Ranger Raptor airbag kit designed to work alongside your existing suspension — not replace it. It is a bolt-on, air-adjustable load assist system that installs alongside the rear struts, adding support exactly where it is needed without altering ride height or suspension geometry.
Install the kit, adjust the air pressure to suit the load, and the rear sits level regardless of what you are hauling. When you are not loaded up, simply reduce the pressure and the Raptor rides exactly as it did from the factory. No compromise, no permanent changes, no trade-offs. Adjustable from 5 to 100 PSI, you have full control over the level of support at any time.
The Airbag Kit That Keeps the Raptor Off-Road Ready.
The Raptor's long-travel suspension needs freedom to move, and a conventional airbag kit can restrict that articulation when the suspension extends. That is why most generic Ranger Raptor airbag kit options fall short for off-road use.
The Polyair Bellows Ultimate Kit solves this with an integrated Cradle Kit, which allows the bellows to separate from the axle under full suspension droop. The airbag does its job under load. On the trails, your suspension moves exactly as it was designed to.
What the Ranger Raptor Airbag Kit Delivers.
Here is what the Polyair Bellows Ultimate Ranger Raptor airbag kit delivers on both PX and PY models:
Level rear end under load — no more sagging when towing a trailer or carrying gear. Headlights point where they should, and the Raptor handles predictably with weight on the back.
Adjustable air support from 5–100 PSI — tune the pressure to suit the load. Light trailer, full tray, or maximum payload — you set the pressure to match.
Improved braking stability — a level stance means the brakes work as designed, front and rear, regardless of load.
Full suspension travel maintained — the integrated cradle allows the bellows to separate under extension, preserving the Raptor's full articulation range on rough terrain.
No change to ride quality unladen — reduce the air pressure when you are not loaded and the Raptor rides exactly as it did from the factory.
Bolt-in installation — no welding, no permanent modifications. The kit is fully reversible.
Ranger Raptor Airbag Kit — PX & PY
The Polyair Bellows Ultimate Ranger Raptor airbag kit is available for both the Gen 1 PX and Gen 2 PY models. Select your generation below to find the right kit for your vehicle.
Make Your Raptor as Capable Towing as it is Off-Road.
The Polyair Bellows Ultimate Kit is the towing solution Raptor owners have been waiting for.